Knitted slippers-free knitting pattern

Knitted slippers-free knitting pattern

Knitted slippers

Any one of these stitch patterns сап be used to make these slippers. Knit them all and become proficient at three
stitch patterns!

Designsby LAURIE GONYEA

Sizes
Woman’s small (medium, large)   Instructions are given for sma\lest size, with larger sizes in parentheses.
When only 1 number is given, it applies to all sizes.

Finished Measurement
Length: 9 (1 О, 11) inches
Materials
• Plymouth Yarn Cleo (DK weight; 100% mercerized pima cotton; 125 yds/50g per skein):

2 skeins Cayman Вау #0165 • Size 5 (3.75mm) needles or size needed to  obtain gauge
• Stitch markers

Gauge
28 sts and  24 rows = 4 iпches/1 Ост in Whelk pat.
32 sts and 32 rows = 4 iпches/1 Ост in Fractured Lattice pat.
40 sts and  24 rows = 4 iпches/1 Ост in Quilted Cross-St pat.

Special Abbreviations
Left Twist (LT): Skip first st оп LH needle, knit 2nd st tЫ, knit first st and slip both sts off needles.
Right Twist (RT): K2tog keeping both sts оп needle, knit first st.

Pattern Stitches
Whelk (Multiple of 4 sts + 3)
Note: А chart is provided for those
preferring to work Whe/k pat from
а chart.
Row 1 (RS): К 3, *sl 1, k3; rep from*
across.
Row 2: Rep Row 1.

Row 3: Kl, *sl 1, k3; rep from * to last
2 sts, sl 1, kl.
Row 4: Р 1, *sl 1, р 3; rep from * to last
2 sts, sl 1, р 1.
Rep Rows 1-4 for pat

Fractured Lattice (Multiple of 8 sts + 8)
Note: А chart is provided for those
preferring to work Fractured Lattice
pat from а chart.
Row 1 (WS) and all other WS rows:
Purl.
Row 2 (RS): *LT, k2, LT, RT; rep from *
across.
Row 4: *Kl, LT, k2, RT, kl; rep from *
across.
Row 6: *RT, LT, RT, k2; rep from *
across.
Row 8: К 3, *LT, k2, RT, k2; rep from * to
last 5 sts, LT, k3.
Rep Rows 1-8 for pat

Quilted Cross-St (Multiple of 4 sts + 4)
Rows 1 and 3 (WS): *Pl , kl; rep from *
across.
Row 2 (RS): *Pl , sl 1 kwise, kfb, kl ,
pass slipped st over last 3 sts made;
rep from * across.
Row 4: Pl , kl , *pl , sl 1 kwise, kfb, kl,
pass slipped st over last 3 sts made;
rep from * to last 2 sts, pl, kl.
Rep Rows 1- 4 for pat.

Pattern Notes
Slippers are shown in Whelk pattern. Instructions are included for slippers using 2 additional pattern stitches.
Unless specified otherwise, slip stitches purlwise with yarn held to the wrong side. Ап attached 1-cord edging is formed as follows: Knit 3 at beginning of every row and slip last 3 stitches purlwise with the yarn in front.

Knitted slippers-free knitting pattern

Knitted slippers-free knitting pattern

 

Whelk Pat
Whelk Slippers

Cast on 57 sts.
Row 1 (RS): K3, pm, work Row 1 of Whelk pat to last 3 sts, pm, si 3 wyif.
Continuing to work first and last 3 sts as l-cord edging and center sts in Whelk pat, work even until piece measures 7 (8, 9) inches, ending with a WS row.
Next row: K3, p1, *k1, p1; rep from * to marker, si 3 wyif.
Next row: K3, k1, *p1, k1; rep from * to marker, si 3 wyif.
Rep last 2 rows until slipper measures 9
(10,11) inches, ending with a WS row and removing markers on last row.
Shape Toe
Row 1 (RS): *K2, k2tog; rep from * to last st, k1—43 sts.
Rows 2,4 and 6: Purl.
Row 3: *K1, k2tog; rep from * to last st, k1—29 sts.
Row 5: *K2tog; rep from * to last st, k1—15 sts.
Row 7: *K2tog; rep from * to last st, k1—8 sts.
Cut yarn, leaving an 18-inch tail. Using tapestry needle, thread tail through rem sts and pull tight.

Fractured Lattice Slippers

Cast on 62 sts.
Row 1 (RS): K3, pm, work Row 1 of Fractured Lattice pat to last 3 sts, pm, si 3 wyif.
Continuing to work first and last 3 sts as l-cord edging and center sts in Fractured Lattice pat, work even until piece measures 7 (8, 9) inches, ending with a WS row.
Next row (RS): K3, *p1, kl; rep from * to marker, si 3 wyif.

Rep last row until slipper measures 9 (10,11) inches, ending with a WS row and removing markers on last row.
Shape Toe
Row 1 (RS): *K2, k2tog; rep from * to last 2 sts, k2—47 sts.
Rows 2,4 and 6: Purl.
Row 3: *K1, k2tog; rep from * to last 2 sts, k2—32 sts.
Row 5: *K2tog; rep from * across—
16 sts.
Row 7: *K2tog; rep from * across—
8 sts.
Cut yarn, leaving an 18-inch tail.
Finish same as for Whelk Slippers.


Quilted Cross-Stitch Slippers
Cast on 74 sts.
Row 1 (RS): K3, pm, work Row 1 of Quilted Cross-St pat to last 3 sts, pm, si 3 wyif.

Continuing to work first and last 3 sts as l-cord edging and center sts in Quilted Cross-St pat, work even until piece measures 7 (8, 9) inches, ending with a WS row.
Next row (RS): K3, *p1, k1; rep from * to marker, si 3 wyif.
Rep last row until slipper measures 9
(10,11) inches, ending with a WS row and removing markers on last row.

Shape Toe
Row 1 (RS): *K2, k2tog; rep from * to last 2 sts, k2—56 sts.
Rows 2,4 and 6: Purl.
Row 3: *K1, k2tog; rep from * to last 2 sts, k2—38 sts.
Row 5: *K2tog; rep from * across—
19 sts.
Row 7: *K2tog; rep from * to last st, kl —10 sts.

Cut yarn, leaving an 18-inch tail.
Finish same as for Whelk Slippers.
Finishing
Using tail, sew approx 2V5 inches from toe along top of slipper. Secure yarn by weaving through several sts on WS and then cut.
Fold slipper in half lengthwise and sew heel edges tog to close slipper.
Weave in ends. ■

Categorized in:

Miscellaneous,

Tagged in: